How To Repair Chain Link Fence

Download Article

A guide to fixing your fence yourself

Download Article

Concatenation link fences often sustain modest harm from bad atmospheric condition and falling debris, but this is something you can set up on your ain. To fix a bad runway, starting time past purchasing and cut a replacement rail. Once you've installed the rail, tie the mesh in place with pliers and wire ties. You can use the pliers to install a mesh or set up smaller areas by weaving in new strands. Apply a come-along tool to tighten the meshing and proceed your fence potent.

1. ane

   Measure the diameter of the old rails. Hold a tape measurement against the ends of the track you wish to replace. Annotation the pipe's diameter so you tin lodge properly-sized replacements.

2. 2

   Buy new rails from a home improvement shop. Get rails the same size equally your former ones. If part of your rail is loose or broken, yous tin can bring it to the store so the employees tin can aid you discover a matching rail.

   • The rail should have i tapered end and one wider terminate.

   Advertisement

3. 3

   Remove the wire ties on the contend's top rail. The ties connect the top of the concatenation mesh to the rail. Put on a pair of gloves and use pliers to bend the ends of the ties. Pull the ties through the concatenation links to costless the runway. Remove all the ties on the part of the rail you need to replace.

4. 4

   Measure and mark the new rail for cutting. Get someone else to help you lot hold the quondam rail upward to the new i. Slide the smaller, tapered end over the one-time rail, making sure the back stop of the tapered department lines upwards with the damaged role you lot want to cut. Employ a pencil to marker this on the old rails, then mark the rail'southward other stop.^[1]

5. 5

   Put on prophylactic gear before cutting the rail. Get some protective polycarbonate eyeglasses to protect yous from metallic fragments when cutting the rail. Also put on a respirator mask to avoid breathing in metal dust.^[2]

   • If yous're going to utilise a reciprocal saw, it'due south recommended that yous besides wear hearing protection.

6. 6

   Cut the damaged rail with a hacksaw. ^[3] Find the line you marked earlier on the one-time rail. Saw into it to sever the runway at 1 end. Cut the runway off at the other end to gratis it. Slide the former rail off and set up information technology aside.^[4]

   • You may apply a reciprocal saw, simply take a friend hold the rail in place every bit you cut it.

7. 7

   Unbolt the top rail from the corner postal service to requite yourself more room. Go to the corner post on the side where you'll install the tapered finish of the new rail. Use an adjustable wrench or ratchet wrench to remove the railroad vehicle bolts on the tension bands. Slide the rail towards the post to move it.^[v]

8. 8

   Lay the new rail in place. Offset, slide the larger end of the runway onto the smaller end of the erstwhile rail. Then slide the tapered finish of the new rail into the rail you lot unbolted. You may need to saw the new rail a little bit to get information technology to fit perfectly.^[vi]

9. nine

   Reconnect the track and wire ties. Slide the rails back into identify, and so replace the railroad vehicle bolts to secure the corner bolt in identify. Using pliers, loop the old wire ties around the runway and through the chain links to secure the mesh to the runway. The wire ties should be placed every 24 in (61 cm) forth the acme track.^[7]

   • If you need to replace the wire ties, purchase metal wire ties or nylon cable ties at a home comeback store.

10. 10

    Repeat the process to replace the bottom rails. If your fence has a bottom track, information technology is repaired the same way as the top rail. This time, loosen the corner postal service's lower tension band, then remove the wire ties from the bottom of the debate. Measure, cut, and install the new track like yous did before.

Advertisement

1. i

   Utilize pliers to detach the top runway's wire ties. Locate the wire ties connecting the mesh to the top rail. Wearing gloves to protect your hands, utilize your pliers to pull the ties through the chain links. This detaches the mesh from the rails. Pull the mesh back from the rail, but don't remove information technology.^[8]

   • If the wire ties aren't rusted or broken, set up them aside and reuse them later.

2. 2

   Remove the lower wire ties to gratis the damaged wires. First, detect the tiptop ends of the damaged wires. They'll be wrapped effectually the undamaged wires, so pull them apart with the pliers. Follow the strands all the way downward to the basis and utilise the pliers to also remove the lower wire ties.^[ix]

3. 3

   Pull the wires upwards from the fence to remove them. ^[ten] Grab the top ends of the damaged wires. You should be able to remove them by pulling them upwards off the fence. If they're even so stuck, go on unraveling the chain links by twisting the damaged wires around the undamaged ones.

4. 4

   Cutting the chain link cloth to size. ^[11] If you're trying to gear up a big expanse in the debate's meshing, purchase a roll of concatenation link fabric from a home improvement store. Measure out enough of the material to cover the gap. Untwist the wires at the finish of the mesh department to remove it from the roll.

   • If you're fixing a minor area, you tin use wires from an erstwhile fence

5. 5

   Weave the new wires into the contend. Hold the new mesh in identify by tying it to the lesser bar with wire ties.^[12] To connect it to existing mesh, become a wire from the sometime fence or mesh scroll. At the bottom rail, wrap the loose strand around the old mesh. Run the wire diagonally upwards to wrap it effectually the new mesh. Continue doing this until reaching the top runway.^[xiii]

   • The chain links should grade a diamond blueprint when you're finished. If you're not trying to patch up old meshing, yous don't need to do this.

6. 6

   Tie the wire to the meridian rails. At the rail, loop the ends of the wires over each other. Pull the ends down towards the rail. Finish by applying wire or cablevision ties every 24 in (61 cm) along the rail to bind the wires to it.^[xiv]

   • If your debate has a bottom rail, likewise secure the bottom ends of the wires to it.

7. seven

   Tighten the chain link mesh. To set the mesh in place, makes sure the mesh is unbolted from the tension bands on the posts. Attach a come-along tool to the ii nearest posts. Crank the come-along tool until the concatenation links move no less than ¹⁄₄  in (0.64 cm) when you push them together with your fingers.

   • You can get a come-along tool at a hardware store.

Advertising

Inquire a Question

200 characters left

Include your email accost to go a bulletin when this question is answered.

Submit

Advertisement

• It'south easier and less expensive to replace damaged mesh with a roll instead of individual wires.

Advertisement

Things Yous'll Demand

• Pliers
• Hacksaw or reciprocating saw
• Safety glasses
• Hearing protection
• Gloves
• New track
• Wire ties

• Mesh scroll or wires
• Wire ties
• Pliers
• Gloves

Almost This Article

Article Summary 10

Repairing a concatenation-link fence is fairly straight-forward, and virtually fixes can be washed on your own. To supersede the summit or bottom rail, you'll need to purchase a rail the same diameter as the old ones. Then, use pliers to remove the wire ties holding the former track, put the new rails in place, then reconnect the track with wire ties. If the new rail is too long, you tin use a hacksaw to cut it to size. If you want to repair the chain mesh, you'll need to cut the wire ties with pliers, have out the erstwhile sheet, then secure a new sheet of mesh to the rails. For more than communication on measuring your new contend pieces, read on!

Did this summary assistance you?

Thanks to all authors for creating a page that has been read 54,436 times.

Did this article help you?

Source: https://www.wikihow.com/Repair-a-Chain-Link-Fence

Share this post